德升科技——陶瓷蜂巢轉輪除濕機
特點
?該系列采用P.I.D溫度控制系統，可精確控制再生溫度；
?該系列除濕系統采用高效冷卻器結構，確保更低回風溫度及露點；
?可選配干燥電熱與溫控表，搭配干燥料桶可對原料進行除濕干燥作業；
?內部裝有回風過濾器，確保蜂巢轉輪不不受原料粉塵污染。
ThisseriesadoptsP.I.Dtemperaturecontrolsystem,whichcanaccuratelycontroltheregenerationtemperature.
Thisseriesofdehumidificationsystemadoptshigh-efficiencycoolerstructuretoensurelowerreturnairtemperatureanddewpoint.
Optionaldryingelectricheatingandtemperaturecontrolmeter,withdryingbarrelcanbeusedtodehumidifyanddryrawmaterials,
Areturnairfilterisinstalledinsidetoensurethatthehoneycombwheelisnotpollutedbyrawmaterialdust.
說明
DSC系列陶瓷蜂巢轉輪除濕機主要用于企業大中型注塑，擠出成型設備中吸濕性較強的工程塑料進行高效率的除濕作業。本公司所采用的蜂巢轉輪在理想狀態下露點可達到-40攝氏度以下，全系統采用P.I.D溫控系統為標準裝備，提供可實時監控機器除濕效果的露點計供選配，最大干燥風量可達4000米每小時。
TDBseriesceramichoneycombrotarydehumidifierismainlyusedforhighefficiencydehumidificationoperationsofengineeringplasticswithstronghygroscopicityinenterpriselargeandmedium-sizedinjectionmoldingandextrusionmoldingequipment.Thedewpointofthehoneycombwheelusedbythecompanycanreachbelow-40degreesCelsiusunderidealconditions.ThewholesystemadoptsPIDtemperaturecontrolsystemasstandardequipment,andprovidesadewpointmeterthatcanmonitorthedehumidificationeffectofthemachineinrealtime.Themaximumdryairvolumecanreach4000metersperhour.
<
<
<
<
<
<
<
<
